View DTD543XE1_5048235.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DTD543XE / DTD543XM
Transistors
500mA / 12V Low VCE (sat) Digital transistors (with built-in resistors)
DTD543XE / DTD543XM
Applications Inverter, Interface, Driver Feature 1) VCE (sat) is lower than conventional products. 2) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). 3) The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. 4) Only the on / off conditions need to be set for operation, making the device design easy. Structure NPN epitaxial planar silicon transistor (Resistor built-in type) Dimensions (Unit : mm)
DTD543XE
1.6 0.3
(3)
0.8 1.6
0.7 0.55
0.2 0.5 0.5 1.0 EMT3 JEITA No. (SC-75A) JEDEC No.
0.2
0.15
0.1Min.
(2)
(1)
(1) GND (2) IN (3) OUT
Each lead has same dimensions
Addreviated symbol : X43
DTD543XM
0.2 0.8 1.2
1.2 0.32
(3)
0.2
0.22
(1)(2)
0.4 0.4 0.8
0.13 0.5
(1) IN (2) GND (3) OUT
VMT3
Each lead has same dimensions
Addreviated symbol : X43
Absolute maximum ratings (Ta=25C)
Parameter Supply voltage Input voltage Collector current Power dissipation Junction temperature Storage temperature
2 1
Packaging specifications
Limits Unit V V mA mW C C
Part No. DTD543XE DTD543XM - Package Packaging type Code Basic ordering unit (pieces) EMT3 Taping TL 3000 VMT3 Taping T2L 8000 -
Symbol VCC VIN IC (max) PD Tj Tstg
DTD543XE DTD543XM 12 -7 to +12 500 150 150 -55 to +150
1 Characteristics of built-in transistor. 2 Each terminal mounted on a recommended land.
Electrical characteristics (Ta=25C)
Parameter Input voltage Output voltage Input current Output current DC current gain Transition frequency Input resistance Resistance ratio
Characteristics of built-in transistor.
Equivalent circuit
Max. 0.3 - 300 1.4 500 - - 6.11 2.6 Unit V mV mA A - MHz k - Conditions VCC= 5V, IO= 100A VO= 0.3V, IO= 2mA IO/II= 100mA / 5mA VI= 5V VCC= 12V, VI=0V VO= 2V, IO= 100mA VCE= 10V, IE=-5mA, f=100MHz - -
IN GND OUT IN R2 GND R1 OUT
Symbol VI(off) VI(on) VO(on) II IO(off) GI fT R1 R2/R1
Min. - 2.5 - - - 140 - 3.29 1.7
Typ. - - 60 - - - 260 4.7 2.1
R1=4.7k / R2=10k
Rev.B
1/2
DTD543XE / DTD543XM
Transistors
Electrical characteristic curves
200 OUTPUT CURRENT : IO (mA) 180 160 140 120 100 80 60 40 20 0 0 0.1 0.2 0.3 0.4 OUTPUT VOLTAGE : VO (V) Ii=0.1m Ii=0mA 0.5 0.1 0.01 Ii=1.0mA Ii=0.9mA Ii=0.8mA Ii=0.7m Ii=0.6m Ii=0.5m Ii=0.4m Ii=0.3m Ii=0.2m 100 OUTPUT CURRENT : IO (mA) V0=0.3V INPUT VOLTAGE : VI (V) Ta=40 25 85 125 100 VCC=5V 10
Ta=25
10
1
1
0.1
Ta=125 85 Ta=125 25 85 40 25 40
0.01 1 100 0 0.5 1 1.5 2 OUTPUT CURRENT : IO (mA) INPUT VOLTAGE : VI(off) (V)
Fig.1 Output Current vs. Output Voltage
Fig.2 Input Voltage vs. Output Current
Fig.3 Output Current vs. Input Voltage
1000 Ta=125 85 25 40 OUTPUT VOLTAGE : VO(on) (V) VO=5V DC CURENT GAIN : GI
1
100
0.1
Ta=125 85 25 40
10
1 0.01
0.01 0.1 1 10 100 1000 OUTPUT CURENT : IO (mA) 1 10 100 1000 OUTPUT CURRENT : IO (mA)
Fig.4 DC Current Gain vs. Output Current
Fig.5 Output Voltage vs. Output Current
Rev.B
2/2
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. It is our top priority to supply products with the utmost quality and reliability. However, there is always a chance of failure due to unexpected factors. Therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. ROHM cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the NOTES specified in this catalog.
Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
www.rohm.com
Copyright (c) 2008 ROHM CO.,LTD.
THE AMERICAS / EUROPE / ASIA / JAPAN
Contact us : webmaster@ rohm.co. jp
21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121 FAX : +81-75-315-0172
Appendix1-Rev2.0

▲Up To Search▲

Price & Availability of DTD543XE1

	To Download DTD543XE1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .